Plasma cutting machine
Plasmac cutting machine LXP1325-A2+fire cutting
1 MACHINE INTRODUCTION
1. Easy and quick operation Pioneering field adjustable cutting torch height control, over the cutting torch raised control body design has all the necessary movement and control keys, to mobile operators in the cutting torch counterpoint is very convenient. Humanized design, more efficient operation. 2. Professional design, beautiful and atmosphere, more durable All keys, all adopt the top design of crystal buttons, relative to other enterprises film button, button always ensure that clear bright, never wear. At the same time, the host body all adopt the technique of the lacquer that bake, colour is beautiful and durable. 3. Simple and straightforward way of graphics programming Complex graphics CAD design is used in the office, the U disk into the cutting machine, simple graphics can also be on the cutting machine using a very simple and straightforward way programming input directly, such as "straight line, the fourth quadrant, X40, Y30". This way of programming, ordinary operators are very easy to learn. 4. A fool type operating mode Screen below a reminder of various operating methods, the operator can do not need training, does not need to look at the instructions. |
2 APPLICATION
This machine can cut mild steel with flame cutting, and cut high carbon steel, stainless other nonferrous metal with Plasma cutting; can configurate as you required.,thus it is such as machinery, automobile, shipbuilding, petrochemical, war industry, metallurgy, |
3 MACHINE SAMPLE
Technical Specification |
|
Model |
LXP1325/1530 |
Machine dimension (mm) |
Maximum 12 meter in width and not limited in length |
Effective processing area (mm) |
1 meter less in width and 2 meter less in length than machine size |
Suggested cutting thickness (mm) |
Stainless steel:1-50mm and Carbon steel:6-150mm with frame cutting |
Drilling capacity (mm) |
Maximum 140mm in depth and 35mm in diameter |
Drilling power |
8Kw (25hp) 1Kw=1.36PS=1.34HP |
Drilling feed |
10m/min (400ipm) |
Drilling torque |
200 N.M. (150 ft-lb) |
Borehole pressure |
11000 N (2500 lbf) |
Cutting Speed (mm/min) |
50-9000 |
Running speed (mm/min) |
12000 |
Basic components |
|
Cutting Mode |
Oxy-fuel/ Plasma/ High definition plasma/ Laser |
Drive mode |
Servo motor, Dual-side |
Guide track |
Straight ball-guide |
Cutting Torch Number |
Customer specified |
Driving Motor |
Panasonic from Japan |
NC Controller |
Micro EDGE pro, Shanghai KP, SJTU-SK |
Plasma Power |
Victory (Thermadyne), Kjellberg, Hypertherm, TAYOR LGK |
Programming software |
FASTCAM |
Gearbox |
SEW or Neugart from Germany |
Other Data |
|
Working temperature |
- 10°C -45°C |
Humidity |
<90%, no condensation |
Surroundings |
Ventilation, vibrationless |
Power voltage |
3×380V±10% 50Hz/ according to user's local condition |
Operation language |
Multilingual and English available |
Options |
|
Powder marking |
available |
Under water cutting |
available |
Beveling torch |
available |
Strip cutting torch |
available |
Heating and cooling system |
available |
Integration dust extraction |
available |
Thin plate processing device |
available |
5 SIMILAR MODEL
LXP1212/LXP1015/LXP1530/LXP2030/LXP2040/LXP2060