Fiber marking machine
fast speed high quality stable fiber laser marking macine on metal
1.THE MATERAILS CAN BE PROCEEDED DEPENDS ON:
Fiber laser marking machine is specially developed for metals marking industry by LINK Laser Company. This machine was equipped with original American RF and high-speed galvanometer,the speed is extremely fast and the precision is very high. The machine performance is steady and can continuously working 12 hours. The optical system is fully sealed, it can prevent the dust enters laser body and reduces the equipment failure rate. |
2.MACHINE CHARACTERS:
1. Updating to 3th-generation laser marking machine.
2. High quality laser path suitable for delicate marking. Reaching nearest to the limit of diffraction.
Exporting TEMOO of fundamental transverse mode. M2 near to 1. Beam divergence angle is
only 1/4 ofdiode laser. Focus dot diameter is not over 20 um.
3. High pulse repeating rate and stable power bring high speed laser marking. Unit pulse power
surge is lower than 1%. Easy control laser dot size, thickness and shape.
4. High speed 2-3 times over than traditional diode pumped marking machine.
5. Air-cooling smart machine size!
6. Long lifetime. Ultra-low power consumption of 0.5 kw.
Efficiency conversion reach to over 30%.
7.Color marking.
|
3. MARKING MATERIALS:
Applicable Materials: leather, wood, textiles, plastics, acrylic, glass, crystal, stone, MDF, dual-color board, organic glass, paper, jade, agate,stainless steel, aluminum and other metal surface marking. Applicable Industries: The equipment is widely used in food and beverage, pharmaceutical, tobacco, leather, packaging, building materials, lighting, accessories, cosmetics, electronics and other industries, low consumption, non-toxic, no pollution. |
4 MACHINE SAMPLES:
5 MACHINE TECHNOLOGY PARAMETER:
NO. Model LXJFiber-20W(30/50/70/100W is optional) |
|
Laser Power |
20W(30/50W is optional) Brand is MAX/CAS/RAYCUS |
Working Area |
110*110mm/150*150/175*175/200*200/300*300mm |
Cooling Mode |
Air Cooling |
Laser Wavelength |
10.64um |
Response Time |
0.5ms |
Frequency of pulse |
20-100KHz |
Marking Depth |
≤0.4mm |
Marking Speed |
≤8000mm/s |
Marking Lines |
1-10 lines |
Minimum Line Width |
0.01mm |
Minimum Character |
0.15mm |
Repeatability Accuracy |
±0.002mm |
Resolution Ratio |
0.1mm |
Marking Content |
Text, pattern, date, bar code, etc |
Operation System |
Microsoft Windows XP or Windows 2000 |
Control Software |
EZCAD Control Software |
Graphic Format Supported |
BMP, JPG, GIF, TGA, Ai, DXF, PLT, PNG, TIF, ai, DXF, DST, etc. |
Unit Power |
≤1.2KW |
Operation Temperature |
5°C-40°C |
Relative Moisture |
≤ 90%, no fog |
Supply Voltage |
220V/50Hz/10A |